The TH-208 series room thermostats are
stand-alone microprocessor based thermostats with particular round LCD
display。 It is designed for floor warming application or helping to
limit floor temperature。 This thermostat can be used for hot water
radiant heating systems and electric heating cable system, it has one
floor sensor (sensor is connected to the power base),When the floor
temperature reaches the set-point, the heating system will be closed。
1。 Power Supply: AC24V/AC110V/ AC210~250V, 50/60HZ
2. Timing Error: <1%
3。 Load Current: 16A
4. Accuracy: ±1?C
5. Set-point Range: 0?C - 40?C
6。 Consumption: <1。5W
7。 Sensor: NTC
1. Multi-button electrical operation stage, particular round LCD screen, handsome design.
2. Dark Purple LCD screen with white backlight and white letter show room temperature and time clearly.
3. Thermostat mounted directly onto standard guard box.
4。 Reliable output by relay。
5. Infrared remote control for option.
1。 Low temperature protection: auto start at temperature below 5℃, prevent frostbite。
2. Power off memory function makes thermostat automatically preserve
the parameter and mode under power on condition and restarting after
3. Temperature calibration: Function when the tested temperature is not conforming to actual room temperature.
4. Timing on/off function: automatically open thermostat when timing on and close thermostat when timing off.
5. Detect room temperature every 10seconds and show accuracy on LCD screen.
6. Temperature Display Mode: Temperature either “F” or “C” display mode shift easily.
7。 Time shows on LCD conform to real time。 If the showed time is not
with real time, users could press buttons under power off condition to
8. Separate 5-day (weekday) and 1-day/1-day(Saturday/Sunday) programming with four separate time/temperature periods per day.